-
FEATURES:HCS with hardened teeth.MATERIAL:Wood up to 50 mm, plasterboard and soft plastics.APPLICATION:Plunge easily at any point in the material. High cutting quality and speed.
-
Universal blades for wood, suitable both for lengthwise and crosswise cutting. Alternate teeth.
-
Mobility, versatility and best results – perfectly combined.
The new KAPEX KS 60 dispenses with everything not needed for the job – such as every unnecessary gram of weight. With impressive features such as ergonomically positioned carrying handles, cord holder and transport safety device and an extremely compact design thanks to flush-mounted guide rods, this device makes no compromises in terms of precision and versatility – with a mitre angle on both sides of up to 60 degrees and an inclination angle on both sides of up to 46 or 47 degrees. The Festool twin-column guide with two bearings ensures that the saw blade is guided reliably and smoothly. A range of other clever details such as the LED spotlight, the pull-out extension table, the additional groove function and the bevel help to make the KAPEX KS 60 a perfect combination of mobility, versatility and optimum results.- Compact and lightweight, with ergonomic handles and cord holder
- LED spotlight to show cutting lines precisely (included in the set or available as an accessory)
- Bevel for producing interior and exterior angles
- Inclination angle of up to 47°/46° on each side and mitre angle of up to 60° on each side
-
FESTOOL sander
Functions
The ideal intermediate sander in the compact class.
Perfectly built for manual operation. For reduced fatigue when carrying out overhead sanding work and a good feeling on edges, as well as convenient operation in any position. The ETS EC 150. At just 116 mm high and with a brushless EC-TEC motor and ergonomic housing geometry with perfectly balanced centre of gravity. And with additional innovative details such as automatic dust control, integrated sanding pad brake and the unique Vibration Control System for added health benefits.- Stepless speed preselection, constant speed even under load
- Longlife thanks to EC technology and sanding pad brake with carbide tip
- Compact design and weighing only 1.2 kg for optimal ergonomic work conditions
- Optimal safety while working through vibration detection
- Very high surface quality thanks to 5 mm sanding stroke
- for coarse and intermediate sanding
-
Functions
Greater precision at maximum performance.
Precise cutouts on the scribe mark, precisely guided plunge cuts on delicate surfaces and working with minimal dust generation, even above head height: This is what the cordless VECTURO OSC 18 stands for. Furthermore, the StarlockMax tool holder makes it possible to change tools quickly without the need for additional equipment, while the brushless EC-TEC motor with vibration isolation ensures that work can progress at an ultra-rapid pace at the same consistently high level of comfort. The interplay with the sophisticated positioning and extraction accessories makes the VECTURO an intelligent system solution for most demanding requirements on performance, comfort and precision.- Saves time: The quick-change system with StarlockMax tool holder enables tools to be changed quickly without the need for additional equipment
- Carefully designed: Optional system accessories make it possible to create precisely guided plunge cuts and saw with minimal dust generation – even when working above head height
- Comfortable: Noise and vibration damping for optimum comfort while working. The anti-vibration system ensures that the housing and motor are completely isolated
- Fast: Brushless EC-TEC motor with variable speed control enables work to progress as quickly as possible
- Ideal in combination with the Li-HighPower battery pack: Weighing not even 600 grams, it is both 20% lighter and 50% more compact than a 5.2 Ah standard battery pack
- The OSC in a Systainer³ can also be seamlessly integrated into bott vehicle equipment for easy transportation from the workshop to the construction site. Systainer³ products are compatible with one another and can be connected to all previous Systainer generations, mobile dust extractors and many other system accessories, such as roll boards or the mobile workshop
- Systems get it done – compatible with battery packs from the BP 18 series
-
Functions
Small tool for delicate tasks.
Extremely versatile. Extremely precise. Extremely easy to handle: Whether guided freely or on the guide rail, the OF 1010 router is the ideal one-handed device. Thanks to its size and low weight it can be guided along edges, lines or curves with just one hand. For routing profiles, grooves, rebates and dovetail joints – the OF 1010 impresses with a wide variety of technical solutions.- Outstanding ergonomics and low weight
- Spindle stop for easy cutter changes
- Routing depth adjustment to 1/10 mm
- Quick-acting brake for improved safety (OF 1010 EBQ)
- MMC electronics for adaptation to the working material and temperature monitoring
- Chip extractor integrated into the router baseplate
-
Functions
The true size can be found inside.
Compact but large. Light but powerful. Whether it's used on the construction site or in the workshop, thanks to its huge container capacity of 26 l, the CLEANTEC CTL 26 provides maximum volume with compact dimensions. Equipped with swivelling castor wheels and rear wheels for optimum mobility. It also has a locking brake that provides stability on any surface as well as during transport. The flat filter fully integrated in the suction head ensures the full volume is utilised: This means that the gross and net container volumes are virtually identical. The extremely compact high-performance turbine provides the right suction power. A 3900 l/min volume flow means that nothing remains except clean air. Approved for dust in dust class L.- Maximum utilisation of the container volume – the gross volume is the same as the net volume
- Can be individually retrofitted with an additional socket, compressed air or Bluetooth® module for remote control on the suction hose or automatic start via the Bluetooth® battery pack
- Constantly high suction because of the compact high performance turbine
- Smooth suction hose and optimised SYS-Dock with cord holder and T-LOC function for conveniently connecting Systainers to the mobile dust extractor
- Antistatic function prevents static developing during work
- Attachment of Systainers via SYS-Dock
- Hose garage and cable windup for greater tidiness and safety
- Economical because of the optimal use of the available volume with a SELFCLEAN filter bag in the container
- Container/filter bag capacity 26/24 l
- Approval for dust class L
-
Festool TS 55
Functions
Our masterpiece. Decisively improved. Now twice as fast.
Millions of saws do not lie: The TS has always stood out with its absolute precision cuts, maximum power and extreme durability. The usual reliability remains – but the working speed is unprecedented: The TS 55 now saws at up to twice the speed. In addition, the new generation of cutting blades guarantees perfect cutting quality with maximum cutting performance. With accessories, such as guide rails and the angle stop, or sophisticated and tried-and-test details, such as the splinter guard and extraction system perfectly matched to the machine, the TS 55 provides excellent work results and a top-class sawing system – for every challenge.- Concentrated torque and up to twice as fast work progress with an increased saw blade service life
- Virtually splinter-free on both sides thanks to attachable splinter guard
- The cutting edge from 90° to 47° remains unchanged even when the saw swivels
- Top-class sawing system thanks to a variety of accessories
- Guide wedge for safer work and simple positioning in existing joint
- Angle adjustment with undercut function from -1° to 47°
-
Functions
For quick changes between drilling and screwdriving.
Enjoy full flexibility when drilling and screwdriving: the completely electronic torque adjustment, CENTROTEC quick-change system, as well as angle attachment, eccentric attachment and depth stop can handle any drilling or screwdriving task. The combination of the Li-HighPower battery pack and maintenance-free brushless EC-TEC motor means that the T 18+3 cordless drill is light, long-lasting and durable. The cordless screwdriver and battery pack are completely covered with the Festool SERVICE, giving you peace of mind for your day-to-day work. Available in T-design or – depending on personal preference – in the unique C-design as the C 18.- Switchover from screwdriving to drilling without changing the set torque
- Clever attachments and CENTROTEC rapid tool-change system for all applications: Angle attachment, eccentric adapter and depth stop
- FastFix interface on the cordless drill for rapid change of attachments within seconds without the need for any tools
- Long-lasting, robust and powerful thanks to brushless, maintenance-free EC-TEC motor
- The cordless drill and battery pack are fully covered by the comprehensive support provided by Festool Service
- Noticeably lighter at full power thanks to Li-HighPower battery pack with high-current-resistant battery cells
- Fully electronic torque setting and switch-off for precise screwdriving
- The screwdriver for Systainer³ products can also be seamlessly integrated into bott vehicle equipment for easy transportation from the workshop to the construction site. Systainer³ products are compatible with one another and can be connected to all previous Systainer generations, mobile dust extractors and many other system accessories, such as roll boards or the mobile workshop
-
Festool Impact Driver
Functions
A tool that will stand the test of time.
This compact powerhouse offers an impressive service life thanks to its extremely robust hammer mechanism. The perfect combination of the new generation brushless EC-TEC motor and the battery pack ensure maximum performance and endurance. In addition to this, the TID 18 with 1/4" tool holder turns the screw without straining your wrist – thanks to the tangential hammer mechanism with no strength sapping back torque. The machine weight of just 960 grams also allows you to work for longer without becoming tired.- Robust: Long-lasting quality components, also fully covered thanks to the comprehensive support provided by Festool Service
- Maximum power: Thanks to the extremely powerful, brushless, and therefore long-lasting, latest generation EC-TEC motor with three speed levels, 180 Nm torque and additional T-mode specifically for self-tapping screws
- Safe: kickback-free tangential hammer mechanism protects your wrist
- Ergonomic: compact design enables you to work accurately and for longer without becoming tired, even in hard to reach areas
- Flexible battery system: For applications with high power needs, the 4.0 Ah Li-HighPower Compact battery pack provides the ideal powerful, compact and lightweight solution. For even less weight, opt for the 3.1 Ah Compact battery pack for light screw joints
- Convenient: tool-free 1/4" holder, integrated bit storage, optimum LED illumination of the work area, belt clip for attachment on both sides
- Mobile: packed in a Systainer³, the TID 18 can be integrated perfectly into the bott vehicle fixture for easy transport from the body shop to the building site
-
FEATURES:Bimetal 8% Cobalt Long Life.MATERIAL:Wood & wood with nails up to 5mm diameter, porous concrete, plasterboard and plastics.APPLICATION:Plunge easily at any point in the material. High cutting quality and speed.FEATURES:Bimetal with 8% Cobalt teeth.MATERIAL:Saw blade for wood, plasterboard, plastic, sheet metal, copper and aluminium pipes and profiles.APPLICATION:Flush cutting a nail in wood, cutting copper pipes and aluminium profiles, plunge cutting in plasterboard.
-
FEATURES:Bimetal with 8% Cobalt teeth.MATERIAL:Saw blade for wood, plasterboard, plastic, sheet metal, copper and aluminium pipes and profiles.APPLICATION:Flush cutting a nail in wood, cutting copper pipes and aluminium profiles, plunge cutting in plasterboard.
-
FEATURES:Bimetal with 8% Cobalt teeth.MATERIAL:Saw blade for wood, plasterboard, plastic, sheet metal, copper and aluminium pipes and profiles.APPLICATION:Flush cutting a nail, cutting copper pipes and aluminium profiles, plunge cutting in plasterboard.
-
FEATURES:Bimetal with 8% Cobalt teeth.MATERIAL:Saw blade for wood, plasterboard, plastic, sheet metal, copper and aluminium pipes and profiles.APPLICATION:Flush cutting a nail in wood, cutting copper pipes and aluminium profiles, plunge cutting in plasterboard.
-
FEATURES:Bimetal 8% Cobalt Long Life.MATERIAL:Wood & wood with nails up to 5mm diameter, porous concrete, plasterboard and plastics.APPLICATION:Plunge easily at any point in the material. High cutting quality and speed.
-
FEATURES:HCS with "Japanese" double-row pattern, hardened teeth.MATERIAL:Wood up to 50mm, plasterboard and soft plastics.APPLICATION:High cutting quality, maximum precision and speed. Medium width provide for a wide range of applications.
-
Multiple ripsaws suitable for cutting soft and hard woods. The wiper inserted in the body of the blade prevent the closure of the cut. Flat teeth.
-
High performance blades. TCT resistant to strain with high content of crome (KCr05). This type of blade is perfect for cutting abrasive materials, melaminic and MDF there is a real risk of splintering. Perfect for the cutting of PVC.
-
Set with 2 cutter heads to make 3 different profiles of tongue and groove. Rings for minimum cutting depth.
-
Grooving cutter heads with reversible HW knives with 2 or 3 adjustable perts from 4 to 7.5mm ot 4 to 16mm.
-
Rebating cutter head with HW reversible knives. With two or four teeth and with or without spurs.
-
Glue Joint cutter head with reversible HW knives. Regulation the forced of the joint.
Questions? Call us : +353 86 164 4525
Unit 3 Earls Court,
Beaumont Ave.,
Churchtown,
Dublin 14
info@acesawservice.ie
Call us: +353.86 164 4525
Shop by category
Useful links
© Copyright 2021 | Ace Saw Services | All Rights Reserved | Powered by